Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Tanglewilde, WA

Pool Deck Cleaning for Stamped Concrete in Tanglewilde, WA

Moderate-pressure wash for stamped concrete. Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone. Typical cost $200-$500.

Pool Deck Cleaning for Stamped Concrete is one of the jobs we do most often in Tanglewilde, WA. Typical jobs cost $200-$500, and you approve the price before we begin. On stamped concrete, the method we use is moderate-pressure wash.

Method and pressure

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI, kept even so the sealer isn't stripped in patchesPressure

Cleaning solution: A sealer-safe cleaner; a degreaser for oil spots.

What to know about cleaning stamped concrete

Stamped and colored concrete is usually protected by a sealer. Washing it well is the first step before resealing, and the color and pattern look much better after both.

Avoid: High pressure that strips sealer unevenly or wears off color release on the surface.

How often: Wash yearly; reseal every 2-3 years.

Signs you need pool deck cleaning for stamped concrete

  • Slippery spots near the water
  • Black or green growth at the edges and in joints
  • Rust or leaf stains
  • Faded or dirty coating
  • Hard-water and chlorine residue

What causes the dirt and stains

  • Constant splashing and standing water
  • Sunscreen, body oils and pool chemicals
  • Leaves and pool toys left on the deck
  • Hard water drying on the surface

Safe steps for homeowners

  • Hose off the deck after heavy pool use
  • Remove leaves and toys before they stain
  • Keep chlorine and acid containers off the deck surface
  • Ask us before using any cleaner on a coated or stone deck

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Peeling or etching a coated 'cool deck' surface with high pressure
  • Chemicals and wash water getting into the pool
  • Pitting travertine with acid cleaners
  • Slips on wet, treated surfaces

How we handle pool deck cleaning for stamped concrete

  1. Check the deck material and coating
  2. Protect the pool and nearby plants
  3. Pre-treat algae and stains with pool-safe methods
  4. Clean with pressure suited to the surface
  5. Rinse thoroughly away from the water

Many pool decks have a textured acrylic or 'cool deck' coating. These need lower pressure than bare concrete, and a deck that is peeling may need recoating rather than more cleaning.

Pool Deck Cleaning for Stamped Concrete cost in Tanglewilde, WA

$200-$500Typical range for a typical residential pool deck
1-3 hoursTypical time on site
Once or twice a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stamped concrete

Serving Tanglewilde, WA and nearby towns

Moss and algae make Washington driveways, walkways and patios slippery for much of the year. Cleaning with a surface cleaner and post-treating keeps them safer for longer.

Besides Tanglewilde (ZIP code 98503), we handle pool deck cleaning for stamped concrete in Tanglewilde-Thompson Place (0.1 mi), Lacey (2.3 mi), Olympia (5.6 mi) and Tumwater (6.7 mi). Call (877) 658-5887 for a free quote in Tanglewilde.

Pool Deck Cleaning for Stamped Concrete: frequently asked questions

How much does pool deck cleaning for stamped concrete cost in Tanglewilde, WA?

Pool Deck Cleaning for Stamped Concrete typically costs $200-$500 for a typical residential pool deck, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.

Do you use high pressure for pool deck cleaning for stamped concrete?

For stamped concrete: usually 1,500-2,500 PSI, kept even so the sealer isn't stripped in patches. What we avoid: high pressure that strips sealer unevenly or wears off color release on the surface. We keep the pressure even and controlled, with the right tools for the surface.

Is pool deck cleaning for stamped concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pool deck cleaning for stamped concrete?

Wash yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Tanglewilde, WA

House Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $300-$700

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Solar Panel Cleaning

Gentle solar panel cleaning with soft brushes and purified water, never pressure washing.

Typical $150-$350

Deck Restoration & Staining for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $800-$2,500

Patio Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$400

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

Pressure Washing for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $150-$600

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Rust Stain Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $150-$500

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Fence Cleaning for Vinyl Fencing

Soft wash. White vinyl fencing shows green algae, mildew and sprinkler stains quickly.

Typical $200-$600

Deck Restoration & Staining

Deck restoration that cleans or strips the old finish, brightens the wood and applies a new penetrating stain or sealer.

Typical $800-$2,500

Ready for a cleaner home or business?

Get a free pressure washing quote in Tanglewilde, WA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote